Illustrative AI-generated imageAMOR GROUP | MISSION CRITICAL
CxA-ready temporary testing infrastructure for high-density AI data centres: hybrid liquid/air server emulators, MW-scale load banks, configured rental fleets and field technical support.
Amor + specialist manufacturing capability
Amor Group is building a Canada-headquartered platform for AI data-centre testing equipment and execution. We have partnered with an established specialist manufacturer in Asia whose equipment has been widely deployed in large data-centre environments in Malaysia and Indonesia.
Our partner contributes equipment engineering, manufacturing capacity, factory training, spares and product development. Amor Group leads branding, product definition and strategic development; Amor Energy provides Canadian technical sales, electrical contracting, deployment planning, field execution and after-service.
Corporate structure: Mission Critical Infrastructure is an Amor Group business platform—not a separate corporation. Canadian projects may be contracted and executed through Amor Energy Corporation.
Technical platform
Liquid-cooled AI racks require liquid-cooled test loads. Capacity is planned against contracted IT load, deployed in phases and supported by project-appropriate backup—not by substituting live servers for commissioning equipment.
Recreates the combined electrical and thermal profile of a high-density AI rack to validate power-path stability together with CDU flow, pressure and temperature response.
A configurable hybrid platform for validating rack power, CDU thermodynamics, flow control, pump performance, alarms and extended-load reliability before live servers arrive.
Modular liquid-cooled systems and conventional high-capacity load banks support staged commissioning of UPS, generators, switchgear, distribution and heat-rejection infrastructure.
Representative configurations shown. Final capacity, voltage, frequency, connectors, liquid interfaces, controls, calibration requirements and test plan are confirmed for each project.
Equipment rental + field service
AI rack density and power architecture continue to evolve—from 120 kW and 150 kW classes toward Rubin-era platforms and 800 VDC distribution. Amor combines adaptable rental equipment with the field and engineering support needed to keep each deployment aligned with the actual commissioning plan.
Review the Cx plan, rack mix, test scripts, power interfaces, cooling connections and deployment sequence before equipment arrives.
Support placement, temporary distribution, electrical connections, energization checks and safe readiness at the commissioning site.
Configure load steps, thermal conditions and equipment groupings around the CxA's L3–L5 procedures, witness points and failure scenarios.
Equipment specialists assist with setup, controls, troubleshooting, adjustments and repeat testing when the plan or site conditions change.
Final equipment capacity, voltage, interfaces and staffing are engineered for the project. Amor supports the CxA's process and test scenarios; the CxA retains commissioning authority.
How hybrid testing works
A server emulator applies controlled IT load upstream while recreating the air- and liquid-side thermal demand downstream. One test can expose interactions that isolated electrical or mechanical testing may miss.
What can be proven
Test scenarios are aligned with the project commissioning plan, the CxA's scripts and the equipment sequence of operations.
CxA-aligned execution
Early coordination allows the rental fleet, interfaces, software settings, logistics and field team to arrive ready for the actual witness plan—not merely with generic load banks.
Owner and CxA requirements, IT-load profile, cooling architecture and test scripts
Translate requirements into equipment capacity, interfaces, controls, hookups and deployment phases
FAT / FWT / FOK, settings lock, calibration, documentation and project-specific configuration
Logistics, spares, safe setup, training, pre-functional checks and witness readiness
PFT / FPT / IST support, data capture, repeat tests, issue resolution and evidence package
Typical project terminology may include FAT, FWT, FOK, QA/QC, PFT, FPT, IST and TOI. Exact stage names and responsibilities vary by Owner and CxA.
Manufacturing partner references
Representative manufacturing-partner equipment and deployments from live data-centre programs in Asia. Amor is adapting this capability for global rental, sales and field-service delivery.
Configure a rental or purchase
We can work from the Cx plan, equipment schedule or an early design brief to identify the right rack count, liquid/air split, interfaces, deployment phases and field-service scope.
Start technical discoveryRack count, kW per rack and planned commissioning phases
Voltage, frequency, supply channels, connectors and temporary distribution
Liquid/air split, CDU and manifold details, target flow, pressure and temperatures
FAT/FWT/FOK, PFT/FPT, IST, witness dates and data requirements
Equipment rental or purchase, setup, operators, training, spares and remote support
Equipment + adaptable field service
Bring Amor into the technical discovery with the Owner, EPC and CxA.
